Hello, welcome to Zhejiang Jie Li Da HVAC Technology Co., Ltd. official website!

news

You are here:Home > News

High-quality To warm the water separator products

  • High-quality To warm the water separator products
  • 2017-02-23 19:02:46
  • In the installation of warm (to warm the water separator), many users will worry about a problem, to warm the tube buried in the floor below, if there is leakage of the problem how to solve, how to believe that we all thought, but I can certainly tell you , A good installation team with high-quality geothermal water heater heating products is not the problem of water leakage.

        In the winter, the use rate is very high, is the user used as a low temperature hot water circulation flow carrier of a pipe. To warm the tube high temperature, anti-ultraviolet strong, but also both high temperature characteristics, the use of a long time, pipe toughness is relatively strong, do not need to consider the installation of the climate caused by damage. Is the majority of home users preferred pipe.

    To distinguish the quality of good pipe, to buy the warm tube when the need to pay attention to personally go to the scene material, first look at the surface of the pipe should not be rough, there are rugged feeling, to be flat, no color, and impurities, and then touch A good quality tube is delicate, smooth, pinch, and toughness, will not easily damage.

    Other products recommended: water separator experts http://www.chjld.com/products/dir/claid/116.html


[To warm the water] excellent contribution from yo

  • [To warm the water] excellent contribution from yo
  • 2017-02-23 19:02:46
  • Water separator (to warm water separator) is not it very important? We think it is very important, it into the heating system plays a very important role. If the boiler is compared to the car's engine, then the water separator is the car's gearbox: if the warm pipe to the human blood vessel network, then the water is the central nervous system. Boiler only a "heat source" fills, even a "coal stove", only a good match, but also a good play, not to mention the current domestic market, home boilers are almost all world class. Character is very good, warm to run very reliable: pipe products are also very mature, the vast majority of domestic pipe products can be very good to meet the independent heating to use the system, without too much worry. And the real operation of the system plays a very important role in the water separator has been ignored, it is very deformed, nor should it. Not only the most "expensive" water separator talent to meet.

        Set of water (to warm water separator) applications, in order to create a high, intelligent floor heating system. But to decide whether to meet the functional needs, to warm the water separator may be balanced, with the manipulation of intelligent control, is conducive to energy conservation, and quality of the protection of the water separator products. So we need a careful analysis, thorough understanding, fair selection, making us "to warm the system" optimization. Really make "warm" to become a kind of insurance, reliable, comfortable, energy saving, environmental protection, high-level ancient residential lifestyle facilities, making "warm" to become professional, honest and respected industry.

    Related Recommended: stainless steel sub-catchment http://www.chjld.com/news/index/p/2/message/message/message/message/message/message/message/guide


Anti-season installed [to warm water separator], h

  • Anti-season installed [to warm water separator], h
  • 2017-02-23 19:02:44
  • Unconsciously, we have gradually entered the fall, many people have not swiftly from the summer heat in the sky, the fall has come. Are you ready to challenge the cold winter in the coming winter? Do you start the season?

        Maybe you will think, now will not be too early to install the warm, winter has not come, the weather has not become cold yet! Generally 11, 12 months will consider the installation of warm tube, is still early If you think so, it is wrong. According to statistics every year in October began to buy to warm accessories, to warm the water dispenser http://www.chjld.com/index.php?s=/, brass fittings will increase, and install the warmer of the user even more many. To December, only to install the warmth of the user may not row on the team, after all, the installation staff is limited, the user has so much, the weather gradually cooling, will naturally extend the duration. So early planning, the user is necessary.

        What are the benefits of the installation in the autumn?

    1. good weather, do not want you summer heat, no winter so cold, natural construction fast

    2. Installation to warm the pipe, to warm the water heater, to warm the need for cement backfill, and cement will take some time to get rid of autumn dry time only 2 to 3 days, and winter will be more than a week.

    3. To warm the pipe installed, you need to test no problem to use. If you find the problem in the winter, there is to catch up with the installation peak, the problem to drag a period of time to solve. And autumn has just started to install warm, construction staff is not too busy, can quickly help you solve the problem.

        Said so much, I believe you do not know the benefits of anti-season installed warm it, that does not act up!

    Zhuji manifold http://www.chjld.com/index.php?s=/products.html


[Electric ball valve] of the "welding valve&q

  • [Electric ball valve] of the "welding valve&q
  • 2017-02-23 19:02:44
  •    

    The application of electric ball valve is very wide, can be used in petroleum, chemical, metallurgy, thermal power plants and other industries.

        How the electric valve works:

        Electric valve http://www.chjld.com/index.php?s=/products/show/pid/57.html is composed of two parts, part of the electric actuator, part of the valve, Valve switching power from the electric actuator, and the electric actuator has two sets of trip switch, electric valve first run, you need to set the opening and closing valve stroke, stroke set, you can reach the open when the electric actuator automatically Stop, off in place after the electric actuator can also automatically stop to achieve automation control.

    Among them, the use of high temperature heat transfer oil or high temperature steam is mainly electric butt gate valve. Related requirements: Power supply voltage: 380V, 660V, 415V, 220V, 110V, electric actuators are: switch type, the overall type, intelligent regulation type, explosion-proof type.

        Electric gate valve main performance parameters:

    Drive: electric (with manual)

    Connection: welding

    Sealing material: hard seal (sealing surface for the hard alloy steel)

    Valve diameter: DN250

    Applicable temperature: ≤540 ℃

    Applicable pressure: 10MPa

    Body material: chrome molybdenum vanadium steel

    Electric actuator voltage: 380V

    Work system: 10 minutes in a short time (special order 30 minutes)

    Protection class: IP65

    Electric Actuator Type: Smart Adjustable Type

     Related Products Recommended: Water Separator Ball Valve http://www.chjld.com/index.php?s=/products/show/pid/82.html


[Chinese life] - Zhuji water separator

  • [Chinese life] - Zhuji water separator
  • 2017-02-23 19:02:44
  •  From the functional and structural point of view, sub-catchment (Zhuji water separator) is divided into three types: basic, standard and functional.
        1, the basic type: by the water mains and water mains. A ball valve is provided at each branch port of the branch water main pipe, and a manual exhaust valve is provided on the branch water main pipe. The basic type of water separator does not have the flow regulation function.
        2, the standard type: standard sub-catchment (Zhuji water separator) structure with the basic type of the same, but the stem on the ball valve by the flow control valve instead. The manual exhaust valve on the two main pipes is replaced by an automatic exhaust valve. Standard sub-sumps can adjust the flow rate of each loop, and even the flow of luxury standard sub-sump can be adjusted to achieve artificial intelligence.
        3, functional type: functional sub-collector in addition to all the features of the standard sub-catchment, but also has a temperature, pressure display, automatic flow adjustment function, automatic mixing water heat function, thermal metering function, indoor partition temperature Automatic control function, wireless and remote control function.

      In order to prevent corrosion, sub-catchers are generally made of corrosion-resistant metal or synthetic materials. Commonly used materials are copper, stainless steel, copper nickel, alloy nickel, high temperature plastic and so on. Sub-sump (including connectors, etc.) should be smooth inside and outside the surface, no cracks, trachoma, cold separation, slag, uneven uneven defects, surface plating of the connection, the color should be uniform, the coating is firm, defect.

    Water separator manufacturers http://www.chjld.com/index.php?s=/aboutus.html

     

     

42 条记录 2/9 页 上一页 下一页 1 2345 >> 末页

Home  |  Jie Lida water separator  | about us  |  Products  |  Download  |  Careers  |  Technical Support  |  contact us

浙ICP备10003325号 Zhejiang Jie Lida Pipe Industry Co., Ltd Contact: Li Yunhai mobile number:13606852630 phone:0575-87669088 fax:0575-87669008

Address: Zhejiang Province Zhuji City shop town Yang Yan Road Zip code:311835   Backstage management